| Surgical Steel Threaded Shafts |  | You 've got the balls or other accessories and you need just the shaft ?
Here you go !...these are surgical steel shafts coming in 1.2mm and 1.6mm guage 16 and 14 Guage US, and as usual in a variety of lengths to suit the job !
Of course, if you do not see the size you need, just e-mail us and we can make it for you.
Important Note :
The bent shafts proposed here might not be suitable if you intend to fit a Side Threaded jewelled ball for navel as it might not lock in the correct position for the jewel to face forward. You might be lucky that it fits, but it is a gamble as bananabells are normally made in the workshop and locked in the right direction to allow the jewel to face the right way..
If you intend to fit balls with a jewel on the top and not on the side, then they are perfect for this purpose, but can also be used for plain balls and all body jewelry accessories which do not require a direction . |
|
|
| Dimpled Surgical Steel Ball |  | You have the ring and you need just the ball ? Here you go...these are the surgical steel dimpled balls to fit rings available on the market. They are available in a wide range...just get the right size for your ring !
Tips : If you get a slightly bigger ball than the opening of your ring, you will increase the diameter of your ring. If you choose slightly smaller ball than the opening your ring, you will need to exerce a pressure on your ring to close the opening to hold the ball. You will then decrease the diameter of your ring.
|
|
|
| Dimpled Jewelled Surgical Steel Ball |  | You have the ring and you need just the ball ? Here you go...these are the surgical steel jewelled dimpled balls to fit rings available on the market. They are available in a wide range of colours for the jewel ..just get the right size for your ring !
Tips : If you get a slightly bigger ball than the opening of your ring, you will increase the diameter of your ring. If you choose slightly smaller ball than the opening your ring, you will need to exerce a pressure on your ring to close the opening to hold the ball. You will then decrease the diameter of your ring.
|
|
|
| Plain Threaded Surgical Steel Ball |  | 3mm, 4mm, 5mm, 6mm and 8mm sizes available.
All our Plain Balls are threaded to receive conventional 1.6mm Thick Body jewelry and our new PTFE bars.
3mm Diametre Balls will Fit 1.2mm and 1.6mm Thickness Conventional Body jewelry and our PTFE and BioFlex Bars. |
|
|
|
| 6mm or 8mm Side-Threaded Surgical Steel Jewelled Ball |  | Presented in a wide range of colours, and 2 different sizes ; 6mm or 8mm Diametre.
Threaded 1.6mm 14G US to receive our new PTFE bars and BioFlex bars.
We have specially discounted a set of 3 bars of the material of your choice, BioFlex or PTFE as an option to this product.
Generally used to fit on navels and nipple bars, these jewelled balls could accomodate unusual piercings. |
|
|
| 4mm or 5mm Side-Threaded Surgical Steel Jewelled Ball |  | New! These 4mm or 5mm side threaded surgical steel jewelled balls are to be used with either BioFlex or PTFE bars, as you will then be able to screw them on, to allow the jewel to face the right way.
The thread is 1.6mm 14G US. We have specially discounted a set of 3 bars of the material of your choice, BioFlex or PTFE as an option to this product.
Perfect for a wide range of body piercing, like the ear, belly button 5mm lower ball, or eyebrow 4mm or nipples 2 x 4 or 5mm.
The price shown is per ball. We can of course set them onto a metal bar for you...send us an e-mail with your requirements. |
|
|
| 5mm x 1.2mm Side-Threaded Surgical Steel Jewelled Ball |  | New! This 5mm side threaded surgical steel jewelled balls are to be used with either BioFlex or PTFE 1.2mm bars, as you will then be able to screw them on, to allow the jewel to face the right way.
The thread is 1.2mm 16G US. We have specially discounted a set of 3 bars of the material of your choice, BioFlex or PTFE as an option to this product.
Suitable for body piercing like the ear, nipples, and sometime navel, when you have a small guage piercing and you want to show bigger jewels than the 3mm or 4mm usually available on the body jewelry market for 1.2mm guage.
The price shown is per ball. We can of course set them onto a metal bar for you...just send us an e-mail with your requirements. |
|
|
| Push Fit 2mm Surgical Steel Jewelled Disc Only |  | Designed to fit the BioFlex Internal labrets, the disc is a small 2mm and the jewel is as sparkly as ever ! It will sit nice and close to your skin, ideal for Monroe or Madona piercing, but also lip labret, and various ear piercings when you want to avoid the "ball" type and show just the jewel.
Buy this only if you have already a BioFlex push fit Internal labret. If you need one, you will find the [LINK].
Choose the colour you need using the drop down menus, there is a good combination of colours here ! |
|
|
| Steel Three Quater Ball |  | Specifically designed for surface piercing and exclusive to body-piercing-jewellery.net, this 3/4 Ball is to be used with PTFE but can be used also for some piercings like eyebrows for the top, or bottom or both balls ear cartillage piercings, bridges and even nipples !
Surface piercings requires specific designs to give the piercings the best chances to heal properly..you can now reduce the pressure applied onto your surface piercing...
Thread sizes are 1.2mm or 1.6mm. You can buy PTFE in Packets of Three bars in the PTFE Section...Sky's the limit! |
|
|
| Steel threaded Dome |  | This 5mm surgical steel threaded 1.6mm dome will be welcome by those of you who are tired to see half of the ball sinking in the top of their tongue piercing..but also by those who like the shape for ear piercing, labret, etc..
Can be used with either metal, PTFE, or BioFlex bars and labrets.. measiring 5mm diameter with a 1.6mm thread. |
|
|
| Side threaded Steel Half Ball |  | Specifically designed for surface piercing and exclusive to body-piercing-jewellery.net, this 1/2 Ball is to be used with PTFE but can be used also for some piercings like eyebrows for the top, or bottom or both balls ear cartillage piercings, bridges, nipples and why not navels !!
Surface piercings requires specific designs to give the piercings the best chances to heal properly..you can now reduce the pressure applied onto your surface piercing...
Thread sizes are 1.2mm or 1.6mm. You can buy PTFE in Packets of Three bars in the PTFE Section...Sky's the limit! |
|
|
| Steel Side Threaded Disc |  | Specifically designed for surface piercing and exclusive to body-piercing-jewellery.net, this threaded Disc is to be used with PTFE but can be used also for some piercings like eyebrows for the top, or bottom or both balls ear cartillage piercings, bridges, nipples, labrets and why not navels !!
Surface piercings requires specific designs to give the piercings the best chances to heal properly..you can now reduce the pressure applied onto your surface piercing...
Thread sizes are 1.2mm or 1.6mm. You can buy PTFE in Packets of Three bars in the PTFE Section...Sky's the limit! |
|
|
| Steel Threaded Square Ball |  | Another exclusive to body-piercing-jewellery.net, this threaded Square Ball can be used with PTFE or other metal threaded bars. Looks different on Labrets or Navels for those who are looking for something different ! Body jewelry made to order !
Thread size is 1.6mm. There are 5 flat faces one on the top. |
|
|
| Steel Threaded Cone |  | Presented in a wide range of sizes steel cones are widely used for body piercing jewelry. They give a cool look to your piercings, and you will find here the diameters 3mm and 4mm with 1.2mm threads, but also 4mm, 5mm, 6mm, 8mm, 10mm and 12mm with 1.6mm threads !
The 8mm, 10mm and 12mm are also called spikes as the base is smaller than the length.
You can also use our Cones on PTFE and BioFlex bars.
Make the difference !
|
|
|
|
|
|
|
|
|
| Surgical Steel Threading Tool |  | Affordable and highly practical, this tool has been designed to ease the task to create threads onto 1.6mm and 1.2mm BioFlex or PTFE bars or shafts.
These are used by professional piercers as they can be sterilised, and contains no knurling around hence more hygienic and less risk of intrusion in the gloves used by piercers.
One end has a 1.2mm thread and the other end has a 1.6mm thread.
it is particularly useful if you have a number of bars to thread ...and it makes it easier to screw on any accessory when the BioFlex or PTFE is in the piercing.
|
|
|
